Gayatri Electricals

The Schneider Electric LC1E95 Power Contactor is a component used in electrical control systems for switching and controlling electrical power to loads, typically in industrial or commercial applications.

The LP1K0601BD is a compact 3‑pole contactor from Schneider Electric’s TeSys K series, designed for motor control and general switching applications where moderate current handling and reliable operation are required. It features a 24 V DC coil, integrated auxiliary contact, and is built for easy integration in control panels.

• Type: Electromechanical Contactor (compact)
• Series: TeSys K (Schneider Electric)
• Poles: 3 P (3 main poles)
• Main Contacts: 3 NO (normally open) – rated for switching currents up to 6 A AC‑3
• Integrated Auxiliary Contact: 1 NC (normally closed) for signalling/control circuits
• Coil Voltage: 24 V DC
• Rated Operational Voltage (Power Circuit): Up to 690 V AC
• Control Coil Voltage Range: ~19.2 V DC to ~27.6 V DC (normalised at 24 V)
• Power Rating: ~2.2 kW motor at 380…415 V AC‑3
• Rated Insulation Voltage: 600 V (UL), 690 V (IEC)
• Impulse Withstand: 8 kV
• Mounting: DIN‑rail and panel mountable (chassis mount)
• Connection Style: Screw clamp terminals for reliable wiring
• Operating Temperature: ‑25 °C to +50 °C
• Mechanical Durability: ~10 million cycles (typical)
• Operating Cycles: Up to ~3600 cycles per hour

• Compact and Space‑Saving: Ideal for small to medium motor control panels and equipment.
• Integrated Aux Contact: 1 NC contact simplifies interfacing with control or signalling circuits.
• Wide Voltage Range: Suitable for a broad spectrum of AC power circuits up to 690 V.
• Flexible Mounting: Can be mounted on DIN rails or directly within panels.
• Robust Mechanical Life: Designed for frequent switching and long service life.
• Screw Terminals: Ensure secure and vibration‑resistant connections.

• Control of small motors and pumps in industrial systems
• Lighting and heating circuits requiring compact switching
• Starter and automation control systems
• Integration into PLC or relay panels for load switching

The Schneider Electric LP1K0601BD is a TeSys K series 3‑pole contactor with a 24 V DC coil and 6 A AC‑3 switching capability, ideal for compact motor control and switching applications. It’s DIN‑rail‑ready, features integrated auxiliary contacts, and offers solid performance for light‑to‑medium electrical loads. 

The LC1E06004M5WBIN is an Easy TeSys series power contactor from Schneider Electric designed for reliable switching of electrical loads in industrial and commercial control systems. It belongs to the Easy TeSys control range, offering compact performance for AC applications such as motor control, resistive loads, and automation panels.

• Product Type: Power contactor (Easy TeSys Control)
• Poles: 4‑pole (4P)
• Contact Composition: 4 Normally Open (4 NO) contacts
• Rated Operational Voltage (Ue): Up to 690 V AC (50/60 Hz) for the power circuit
• Rated Operational Current (AC‑1): 20 A @ ≤ 415 V AC
• Coil Voltage: 220 V AC, 50 Hz control supply
• Standards: Conforms to IEC 60947‑4‑1 for contactor performance and safety

• Rated Making Capacity: 60 A @ 440 V AC (AC‑1 duty)
• Rated Breaking Capacity: 48 A @ 440 V AC (AC‑1)
• Short‑Time Withstand Current (Icw):
  • 80 A for 10 s
  • 45 A for 60 s
  • 20 A for 600 s
• Rated Insulation Voltage (Ui): 690 V
• Impulse Withstand Voltage (Uimp): 6 kV
• Control Circuit Type: AC wide‑range (operates reliably across a voltage variation around rated value)

• Terminals: Screw‑clamp type for power and control wiring
• Mounting Support: DIN‑rail and plate mounting options
• Protection: IP20 finger‑safe enclosure
• Dimensions: Approx 45 mm width × 74 mm height × 80 mm depth
• Mechanical Durability: ~10 million operations
• Electrical Durability: ~150 000 operations under AC‑1 load

The LC1E06004M5WBIN is used for:

• Switching motors and resistive loads in control panels
• Lighting, heating, and auxiliary circuits
• Industrial automation systems
• Motor starter combinations when used with overload relays
  This contactor is ideal for control circuits requiring a compact but robust solution.

The LC1E06004M5WBIN is a reliable, compact 4‑pole power contactor with a 220 V AC coil and a 20 A AC‑1 rating, suitable for motor control, load switching, and industrial automation applications. It meets international standards and provides durable performance with DIN‑rail or plate mounting flexibility.

The LC1D098F7 is a TeSys D series electromechanical contactor from Schneider Electric. It’s designed to switch and control electrical power in industrial and commercial applications, particularly for motor starters and automation systems. It combines robust performance, long life, and compatibility with a wide range of accessories.

• Product Type: Electromechanical power contactor
• Series: TeSys D (LC1D) family
• Poles: 4 poles (4P) — 2 main normally open (NO) + 2 main normally closed (NC) contacts
• Coil Voltage: 110 V AC, 50/60 Hz
• Rated Operational Current (AC‑1): Up to 20 A @ ≤690 V AC
• Rated Load (AC‑3): Typically ~9 A for motor switching duty
• Auxiliary Contacts: Built‑in 1 NO + 1 NC auxiliary contacts for control logic and signaling
• Utilisation Categories: Suitable for AC‑1 (resistive/heating) and AC‑3 (motor control) applications
• Terminal Type: Screw clamp connections with IP20 finger‑safe design
• Mounting: Can be panel mounted or mounted on DIN rail with appropriate adapter
• Operating Rate: ~3600 cycles/hour @ 60 °C environment
• Durability: Long mechanical life (~15 million operations) and solid electrical life under load
• Standards Compliance: IEC 60947 series, UL, CSA, CCC, EAC, RoHS/REACH depending on region & certification datasheets

✔ Reliable Switching Performance: Suitable for motor control, lighting, and general industrial loads.
✔ Versatile Auxiliary Contacts: Built‑in control contacts simplify auxiliary wiring and reduce additional modules.
✔ Easy Integration: Compatible with standard TeSys D accessories (timers, latches, surge suppressors, etc.).
✔ Compact Design: 4‑pole configuration in a relatively compact form factor for panel installations.
✔ Global Standards: Designed to meet international safety and performance norms.

• Motor starters and control panels
• Industrial automation systems
• Compressors, pumps, conveyors
• HVAC and machinery control
• Switching resistive and inductive loads

The LC1D098F7 is a 4‑pole Schneider Electric TeSys D contactor with a 110 V AC coil, rated for heavy industrial use up to approximately 20 A (AC‑1) and 9 A (AC‑3). With built‑in auxiliary contacts, flexible mounting, and high durability, it’s ideal for controlling motors and power circuits in commercial and industrial electrical systems.

The Schneider GZ1E21 is a type of power contactor manufactured by Schneider lectric.

The Schneider GZ1E22 is a type of power contactor produced by Schneider Electric. Here are some features and specifications associated with the Schneider GZ1E22

The Schneider GZ1E32 is a type of power contactor manufactured by Schneider Electric. Here are some features and specifications typically associated with the Schneider GZ1E32

The Schneider LAEB1 is a type of power contactor manufactured by Schneider Electric .

The Schneider LC1D25 is a three-pole power contactor manufactured by Schneider Electric. Here are some key features and specifications associated with this power contactor

The Schneider GZ1E02 is a type of power contactor manufactured by Schneider Electric. Here are some features and specifications typically associated with the Schneider GZ1E02 power contactor:

Rated Operational Current (Ie): The GZ1E02 contactor is rated for a specific operational current, which can vary depending on the model and application requirements. The "02" in the model number might indicate a lower current rating, possibly around 2A.

Coil Voltage: Like other contactors, the GZ1E02 requires a control voltage to energize its coil and operate the contacts. The coil voltage can vary depending on the specific model and application requirements.

Poles: The GZ1E02 contactor is available in various pole configurations, including single-pole, double-pole, and multi-pole versions. The pole configuration determines the number of circuits the contactor can control.

There is no specific product line called "Schneider LAEN11" in Schneider Electric's portfolio. It's possible that the product you're referring to may have been introduced after my last update or may belong to a specialized or regional product line.

Schneider Electric EasyPact TVS Add‑On Blocks and Star Delta (LAEN20) is a 2 NO (two normally‑open) auxiliary contact block designed to snap onto compatible Schneider contactors to provide additional control/signal contacts.

We  are  offering  to the product range of Schneider LC1E18004 Power Contactors.