Gayatri Electricals

Here’s a clear description of the KEI 0.5 Sqmm 90m 1 Core Homecab FR Black Wire and similar 0.5 sq mm single‑core flame‑retardant house wires from KEI — a common choice for safe electrical wiring in buildings:

KEI WIRES & CABLES Homecab 0.5 sqmm 1 Core FR Black Wire (and its variants like the 90 m or 180 m rolls) are single‑core electrical wires with 0.5 sq mm cross‑sectional area, multistrand copper conductor, and flame‑retardant (FR) PVC insulation. These wires are part of KEI Industries’ Homecab FR series, designed for low‑voltage building wiring such as lighting, fans, switches, and small appliance circuits.

• Brand: KEI Industries — established Indian manufacturer of house wires and cables.
• Conductor Material: Flexible multistrand copper — good electrical conductivity and easy routing through conduits or boxes.
• Cross‑Sectional Area: 0.5 sq mm — suitable for low‑current circuits.
• Core Count: 1 core — single conductor used for one electrical line (typically live/phase).
• Insulation Type: FR (Flame‑Retardant) PVC — insulation compound formulated to retard flame spread, offering enhanced fire safety compared with non‑FR wires.
• Voltage Rating: Up to 1100 V AC — standard for low‑tension electrical systems in buildings.
• Current Rating: About 4 A typical for this wire size.
• Available Lengths: Often comes in 90 m or 180 m rolls depending on variant.
• Colour: Black insulation — used for phase/live line identification in wiring installations.
• Series: Homecab FR — KEI’s flame‑retardant household wiring range.

The special FR PVC compound used in KEI wires helps retard the spread of fire along the insulation in case of a fault or overload situation. The insulation is also resistant to steam and boiling water, which helps prevent cracking and aging in damp environments (e.g., kitchens or bathrooms).

• Home wiring: Lights, lamps, fans, small sockets, and switches.
• Commercial & office installations: Similar low‑current circuits in shops, offices, and classrooms.
• Panel & control connections: Feed lines where a small gauge conductor is sufficient and fire safety is a concern.
• Concealed or exposed wiring: Works well inside conduits or surface trunking.

The KEI 0.5 sq mm 1 core FR Black Wire is a flame‑retardant, flexible copper electrical conductor with PVC insulation designed for low‑current, low‑voltage wiring in residential and commercial applications. Its fire‑retardant insulation and flexible conductor make it a dependable choice for safe building electrification up to 1100 V. 

Here’s a clear description of the KEI 0.5 Sqmm 1 Core Homecab FR Red Flexible PVC Insulated Electrical Wire (and similar KEI red flame‑retardant variants):

KEI WIRES & CABLES Homecab 0.5 Sqmm 1 Core Flame Retardant House Wire PVC Insulated Cable (Red, 90 m) and related variants are single‑core, flame‑retardant electrical wires from KEI Industries, engineered for low‑voltage building wiring such as lighting circuits, switch wiring, fans, and small appliance feeds in residential and commercial installations.

• Brand: KEI Industries Ltd — a major Indian wire and cable manufacturer.
• Series: Homecab FR family (flame‑retardant PVC insulated house wires).
• Conductor Material: Multistrand copper — good electrical conductivity and flexibility.
• Size / Cross‑Section: 0.5 Sq mm — suited to low‑current circuits.
• Number of Cores: 1 core — single conductor for one wire path (typically live/phase in circuits).
• Insulation: FR (Flame‑Retardant) PVC — insulation formulated to slow the spread of fire in case of electrical faults.
• Voltage Rating: Up to 1100 V AC, standard for typical house/low‑tension wiring.
• Current Capacity: Typically around ~4 A (approximate for 0.5 sq mm).
• Length: Available in rolls like 90 m, 100 m, or 180 m depending on the variant you choose.
• Colour: Red insulation — colour‑coding helps identify the conductor function (e.g., live/phase) in multi‑wire runs.
• Origin: Manufactured in India.

The FR PVC insulation is specially formulated to retard the spread of flames along the wire if a fault or overload occurs. This enhances safety in concealed or exposed wiring inside walls, conduits, or trunking.

• Domestic wiring: Suitable for low‑current lighting circuits, fan points, small socket feeds, and switch loops.
• Commercial installations: Low‑current runs in offices, shops, and similar buildings.
• Identification: Red insulation helps differentiate this conductor from others (neutral, earth, etc.) during installation.
• General low‑voltage applications: Where a 0.5 sq mm conductor is specified and flame safety is desired.

The KEI 0.5 Sqmm 1 Core FR Red wire is a flame‑retardant, PVC‑insulated multistrand copper wire ideal for safe low‑current electrical connections in residential and commercial environments. Its flame‑retardant insulation and PVC jacket support safe, reliable installation up to 1100 V, and the red colour aids in circuit identification.

Here’s a detailed description of the KEI WIRES & CABLES Homecab 0.75 sqmm 1 Core Copper Flame Retardant House Wire PVC Insulated Cable (Blue), which is the type of KEI 0.75 sq mm 1 core FR blue wire used for building electrical wiring:

The KEI 0.75 sq mm 1 core FR blue wire is a single‑core electrical house wire manufactured by KEI Industries, designed for safe and reliable low‑voltage wiring in residential and commercial applications. It features flame‑retardant (FR) PVC insulation that improves fire safety compared to non‑FR wires.

• Conductor Material: Multistrand copper for good electrical conductivity and flexibility, making it easy to route through conduits and junctions.
• Cross‑Sectional Area: 0.75 sq mm — suitable for low‑current circuits like lighting points, small fixture connections, and control circuits.
• Number of Cores: 1 core — a single conductor used for one electrical line (typically live/phase or neutral depending on the wiring layout).
• Insulation: FR (Flame‑Retardant) PVC — specially formulated to slow the spread of flame along the cable under fault conditions, enhancing fire safety.
• Voltage Rating: Up to 1100 V AC — standard for low‑tension building wiring.
• Typical Current Capacity: Around ~7 A (varies with installation and conditions).
• Operating Temperature: Insulation designed for normal building wiring environments (up to ≈70 °C–85 °C).
• Colour: Blue insulation — used to help identify circuit function during installation.
• Length & Packaging: Commonly sold in 90 m or 180 m coils (varies by seller).

• The FR PVC insulation is engineered to reduce the spread of fire along the cable in the event of electrical faults, making it a safer choice than ordinary PVC wires, especially in concealed wiring applications.
• FR wires are typically steam and boiling water resistant, which adds durability in various environments.

• Lighting circuits: Safe wiring for tube lights, LED lights, and other luminaires.
• Switch and fan loops: Connections between switches and fans or small appliances.
• Control and signal circuits: Low‑current control wiring in residential and commercial spaces.
• Panel and small feeder runs: Within distribution boards or short connection runs where a small gauge is needed.

The KEI 0.75 sq mm 1 core FR blue wire is a flame‑retardant, PVC‑insulated copper electrical conductor ideal for low‑current, low‑voltage wiring in buildings. It provides enhanced fire safety compared with standard non‑FR wires and is especially suited for lighting and control circuits.

Here’s a detailed description of the KEI 0.75 Sqmm 1 Core Homecab FR Red Copper PVC Insulated Wire — a widely used flame‑retardant electrical wire from KEI Industries with red insulation:

The KEI 0.75 sq mm 1 core FR red wire is a single‑core copper electrical wire designed for low‑voltage building wiring and power distribution in homes, offices, and light commercial spaces. It features flame‑retardant (FR) PVC insulation that enhances fire safety by slowing down flame spread if a fault occurs. This makes it a safe and dependable choice for concealed and exposed electrical circuits.

• Brand: KEI Industries Ltd — a leading Indian manufacturer of electrical cables and house wires.
• Series: Homecab FR (Flame‑Retardant PVC insulated house wiring).
• Conductor Material: Multistrand copper — excellent conductivity and flexibility for wiring through conduits.
• Cross‑Sectional Area: 0.75 sq mm — suitable for low‑current circuits such as lighting and smaller appliances.
• Number of Cores: 1 core — single conductor for one electrical line (typically live/phase or neutral).
• Insulation: FR (Flame‑Retardant) PVC — insulation formulated to retard flame propagation under electrical faults.
• Voltage Rating: Up to 1100 V AC — standard for low‑tension building wiring.
• Current Capacity: Around 7 A (typical for 0.75 sq mm FR wires in normal installations).
• Length: Commonly supplied in 90 m or 100 m rolls depending on the variant you choose.
• Colour: Red insulation — used to easily identify the conductor’s function in a wiring harness.
• Country of Origin: India.

The FR PVC insulation is engineered to slow the spread of fire along the wire in case of a short circuit or electrical fault, improving safety compared with non‑FR wires. FR wires also resist steam and boiling water exposure, making them more durable in different environments.

• Lighting circuits: Wiring for tube lights, LED lights, and other luminaires.
• Switch loops and fan connections: Suitable for light electrical loads like switches and ceiling fans.
• Low‑current power feeds: Small appliances and control circuits.
• Panel and distribution board connections: Short runs where a small gauge conductor is appropriate.

The KEI 0.75 sq mm 1 core FR red wire is a flame‑retardant, PVC‑insulated copper electrical cable ideal for safe low‑current, low‑voltage wiring in household and commercial electrical systems. Its robust FR insulation helps improve fire safety, while the flexible multistrand conductor ensures durable performance for standard wiring applications.

Here’s a description of the KEI 0.75 Sqmm 1 Core Homecab FR Yellow Wire — a widely used flame‑retardant electrical house wire from KEI Industries:

The KEI 0.75 sq mm 1 core FR Yellow Wire is a single‑core copper electrical cable with flame‑retardant (FR) PVC insulation, designed for safe low‑voltage wiring inside buildings. It is part of KEI’s Homecab FR series, which are commonly used in residential, commercial, and light industrial electrical installations.

• Brand: KEI Industries Ltd — a leading Indian manufacturer of electrical wires.
• Series: Homecab FR — flame‑retardant PVC house wiring.
• Conductor Material: Multistrand copper — excellent electrical conductivity and flexibility for easy routing through conduits and junctions.
• Cross‑Sectional Area: 0.75 sq mm — suitable for low‑current circuits, like lighting points, switch loops, and small appliance feeds.
• Number of Cores: 1 core — single conductor used for one electrical line (typically live/phase or neutral depending on wiring design).
• Insulation: FR (Flame‑Retardant) PVC — insulation compound formulated to slow down flame spread in the event of an electrical fault.
• Voltage Rating: Up to 1100 V AC — standard for low‑tension wiring in homes and businesses.
• Typical Current Rating: Around 7 A for this size in normal conditions (multistrand conductor rated per standards).
• Length: Often supplied in 90 m or 180 m rolls depending on variant.
• Colour: Yellow insulation — used for circuit identification (helps distinguish this conductor from others in multi‑wire installations).

• The FR PVC insulation is formulated to retard the spread of fire along the wire in case of short circuits or electrical faults, enhancing overall fire safety compared to ordinary PVC‑insulated wires.
• These wires are suitable for typical environmental conditions and can be used in concealed or surface wiring supported by conduits or trunking.

• Lighting circuits: Wiring for tube lights, LEDs, and other luminaires.
• Switch loops and fan connections: Ideal for small branch circuits.
• Low‑current power feeds: Suitable for small appliances and control circuits where a 0.75 sq mm conductor is specified.
• Panel and distribution board connections: Short feeder or jumper runs inside boards.
• Colour‑coded wiring: The yellow insulation helps identify specific circuit functions during installation and maintenance.

The KEI 0.75 sq mm 1 core FR yellow wire is a flame‑retardant, PVC‑insulated multistrand copper house wire rated for up to 1100 V AC, typically carrying about 7 A. It is ideal for safe low‑current electrical wiring in homes, offices, and light commercial spaces, with flame‑retardant insulation for improved fire safety and colour‑coded identification for easy electrical installation. 

KEI 0.75 sqmm 1 Core FR Grey Wire is a single-core, PVC insulated, flame-retardant copper electrical wire designed for safe and efficient internal house wiring applications. It is widely used in residential and commercial installations for lighting circuits, control wiring, and low-load connections.

• Brand: KEI
• Type: FR (Flame Retardant) wire
• Size: 0.75 sqmm
• Core: Single core
• Conductor: Multistrand electrolytic copper
• Insulation: PVC (Flame Retardant grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 7 Amp
• Length: Typically 90m / 100m coil
• Color: Grey (also available in red, yellow, blue, black, green)

• Flame Retardant (FR):
  Prevents fire spread and improves electrical safety
• High Conductivity Copper:
  Made from ~99.97% pure copper for efficient current flow
• Flexible Multistrand Design:
  Easy to install in conduits and panels
• Heat Resistant:
  Can withstand high operating temperatures (~70–105°C range depending on series)
• Durable PVC Insulation:
  Protects against moisture, abrasion, and short circuits

• House wiring (lighting points)
• Switchboard connections
• Control panels
• Small electrical appliances
• Internal wiring in buildings

• Grey is mainly used for neutral / identification wiring (depends on wiring standards)
• Performance is same as any other color—only identification differs

KEI 0.75 sqmm 1 core FR grey wire is a safe, durable, and standard house wiring cable, ideal for low-load electrical applications with good fire resistance and long life.

KEI 1 sqmm 1 Core FR Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, specially designed for internal wiring in residential, commercial, and light industrial applications.

It ensures safe current transmission, reduced fire risk, and long-lasting durability, making it ideal for lighting and moderate-load electrical circuits.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 1 sqmm
• Core: Single core
• Conductor: Multistrand electrolytic copper (~32 strands)
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 11–12 Amp
• Length Options: 90m / 100m / 180m
• Standard: Conforms to IS 694 (house wiring cables)

• Flame Retardant Insulation
  Helps prevent the spread of fire and improves electrical safety
• High Conductivity Copper
  Ensures efficient current flow with minimal power loss
• Flexible Multistrand Design
  Easy to install in conduits and electrical panels
• Durable PVC Coating
  Protects against moisture, abrasion, and leakage
• Low Voltage Application (1.1 kV)
  Suitable for domestic and commercial wiring

• House wiring (lighting & small power circuits)
• Switchboards and distribution panels
• Socket wiring (moderate loads)
• Offices, shops, and residential buildings
• Internal wiring for electrical equipment

Available in multiple colors such as:

• Red, Yellow, Blue, Green, Black, White, Grey

👉 Color is used only for identification (phase, neutral, earth); performance remains the same.

KEI 1 sqmm 1 core FR wire is a safe, durable, and widely used electrical wire, suitable for moderate-load applications (~11–12A). It offers good fire resistance, flexibility, and reliable performance, making it a preferred choice for electricians and home wiring.

KEI 0.75 sqmm 1 Core FR Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, specially designed for internal electrical wiring in residential, commercial, and light industrial installations.

It ensures safe current transmission, minimizes fire hazards, and provides long-lasting performance in low-voltage circuits.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 0.75 sqmm
• Core: Single core
• Conductor: Multistrand copper (≈24 strands)
• Conductor Material: Electrolytic grade copper (~99.97% purity)
• Insulation: FR grade PVC
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 7 Amp
• Length: 90m / 100m / 180m coils available
• Operating Temperature: Up to ~85°C

• Flame Retardant Insulation:
  Reduces the spread of fire and enhances safety
• High Conductivity Copper:
  Ensures efficient power flow with minimal losses
• Flexible Multistrand Design:
  Easy installation in conduits and tight spaces
• Durable & Long Life:
  Resistant to moisture, heat, and mechanical stress
• Anti-Rodent & Heat Resistant:
  Suitable for long-term concealed wiring

• Residential house wiring (lighting circuits)
• Switchboards and control panels
• Small electrical appliances
• Internal wiring in offices and shops
• Low-load electrical installations (up to ~7A)

Available in multiple colors such as:

• Red, Yellow, Blue, Green, Black, White, Grey

👉 Color is only for identification purpose—performance remains the same.

KEI 0.75 sqmm 1 core FR wire is a reliable, safe, and widely used electrical wire, ideal for low-load applications like lighting and internal wiring, offering good fire resistance, flexibility, and durability.

KEI 0.75 sqmm 1 Core FR White Wire is a single-core, flame-retardant (FR), PVC insulated copper wire used for internal electrical wiring in homes, offices, and small industrial setups. It is part of KEI’s Homecab series, known for reliability and safety.

This wire is designed to resist fire propagation, provide efficient current flow, and ensure long-term durability in low-voltage electrical installations.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 0.75 sqmm
• Core: 1 Core (single conductor)
• Conductor Material: Copper (multistrand)
• Number of strands: ~24 strands
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 7 Amp
• Length: 90m / 100m / 180m variants available
• Color: White

• Flame Retardant (FR):
  Reduces the spread of fire and improves safety
• High Conductivity Copper:
  Ensures efficient power transmission with low loss
• Flexible Multistrand Design:
  Easy to install in conduits and tight spaces
• Durable PVC Insulation:
  Protects against moisture, abrasion, and electrical leakage
• Low Voltage Application:
  Suitable for up to 1.1 kV systems

• House wiring (lighting circuits)
• Switchboard connections
• Control panels
• Small appliances wiring
• Internal wiring in residential & commercial buildings

• White wire is commonly used for neutral wiring or clean installations
• Helps in easy identification in electrical systems
• Functionality is same as other colors

KEI 0.75 sqmm 1 core FR white wire is a safe, flexible, and reliable electrical wire, ideal for low-load domestic wiring with good fire resistance and long service life.

KEI 0.75 sqmm 1 Core FR Black Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, designed for safe and efficient internal wiring in residential, commercial, and light industrial applications.

This wire ensures reduced fire risk, reliable conductivity, and long-lasting durability, making it suitable for lighting circuits and low-load connections.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 0.75 sqmm
• Core: 1 Core (single conductor)
• Conductor: Multistrand copper (~24 strands)
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 7 Amp
• Length Options: 90m / 100m / 180m
• Color: Black

• Flame Retardant Insulation
  Helps prevent the spread of fire and improves electrical safety
• High Conductivity Copper
  Ensures efficient current flow with minimal power loss
• Flexible Multistrand Design
  Easy to install in conduits and tight spaces
• Durable PVC Coating
  Protects against moisture, abrasion, and short circuits
• Low Voltage Application
  Suitable for systems up to 1.1 kV (house wiring)

• House wiring (lighting circuits)
• Switchboards and panels
• Small electrical appliances
• Internal wiring in homes, offices, and shops
• Control and signal wiring (low load)

• Commonly used for phase or load wiring (depends on wiring standards)
• Helps in easy identification during installation
• Performance is same as other colors

KEI 0.75 sqmm 1 core FR black wire is a reliable, safe, and widely used electrical wire, ideal for low-load applications. It offers good fire resistance, flexibility, and durability, making it perfect for everyday wiring needs.

KEI 0.75 sqmm 1 Core FR Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, specially designed for internal electrical wiring in residential, commercial, and light industrial installations.

It ensures safe current transmission, minimizes fire hazards, and provides long-lasting performance in low-voltage circuits.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 0.75 sqmm
• Core: Single core
• Conductor: Multistrand copper (≈24 strands)
• Conductor Material: Electrolytic grade copper (~99.97% purity)
• Insulation: FR grade PVC
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 7 Amp
• Length: 90m / 100m / 180m coils available
• Operating Temperature: Up to ~85°C

• Flame Retardant Insulation:
  Reduces the spread of fire and enhances safety
• High Conductivity Copper:
  Ensures efficient power flow with minimal losses
• Flexible Multistrand Design:
  Easy installation in conduits and tight spaces
• Durable & Long Life:
  Resistant to moisture, heat, and mechanical stress
• Anti-Rodent & Heat Resistant:
  Suitable for long-term concealed wiring

• Residential house wiring (lighting circuits)
• Switchboards and control panels
• Small electrical appliances
• Internal wiring in offices and shops
• Low-load electrical installations (up to ~7A)

Available in multiple colors such as:

• Red, Yellow, Blue, Green, Black, White, Grey

👉 Color is only for identification purpose—performance remains the same.

KEI 0.75 sqmm 1 core FR wire is a reliable, safe, and widely used electrical wire, ideal for low-load applications like lighting and internal wiring, offering good fire resistance, flexibility, and durability.

KEI 1 sqmm 1 Core FR Blue Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, designed for internal electrical wiring in residential, commercial, and light industrial installations.

It ensures safe current flow, reduced fire risk, and long-lasting performance, making it ideal for lighting circuits and moderate-load applications.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 1 sqmm
• Core: Single core
• Conductor: Multistrand copper (~32 strands)
• Conductor Material: Electrolytic grade copper
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 11–12 Amp
• Length Options: 90m / 100m / 180m
• Color: Blue

• Flame Retardant Insulation
  Helps prevent the spread of fire and enhances electrical safety
• High Conductivity Copper
  Ensures efficient power transmission with low losses
• Flexible Multistrand Design
  Easy installation in conduits and panels
• Durable PVC Insulation
  Protects against moisture, abrasion, and short circuits
• Suitable for Low Voltage (1.1 kV)
  Ideal for domestic and commercial wiring

• House wiring (lighting & small power circuits)
• Switchboards and control panels
• Socket wiring (light loads)
• Office and shop wiring
• Internal building wiring

• Blue wire is commonly used for neutral wiring (as per standard practice)
• Helps in easy identification during installation
• Electrical performance is same as other colors

KEI 1 sqmm 1 core FR blue wire is a safe, durable, and widely used electrical wire, suitable for medium-load household wiring. It offers good fire resistance, flexibility, and reliable performance, making it a preferred choice for electricians and contractors.

KEI 1 sqmm 1 Core FR Red Wire is a single-core, multistrand copper electrical wire with flame-retardant (FR) PVC insulation, designed for internal wiring in residential, commercial, and light industrial applications.

It provides safe current transmission, improved fire resistance, and long-lasting performance, making it ideal for lighting and moderate-load electrical circuits.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 1 sqmm
• Core: Single core
• Conductor: Multistrand copper (≈32 strands)
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100V
• Current Capacity: Approx. 11–12 Amp
• Length Options: 90m / 100m / 180m
• Color: Red

• Flame Retardant Insulation
  Helps prevent fire spread and enhances electrical safety
• High Conductivity Copper
  Ensures efficient power transmission with minimal losses
• Flexible Multistrand Design
  Easy to install in conduits and tight spaces
• Durable PVC Insulation
  Resistant to heat, moisture, and abrasion
• High Insulation Resistance
  Improves safety and reduces leakage current

• House wiring (lighting & small power circuits)
• Switchboards and distribution panels
• Socket wiring for light loads
• Offices, shops, and residential buildings
• Internal wiring for electrical equipment

• Red wire is commonly used for phase (live) wiring
• Helps in easy identification and safe installation
• Performance is same as other colors

KEI 1 sqmm 1 core FR red wire is a safe, durable, and widely used electrical wire, suitable for medium-load applications. It offers good fire resistance, flexibility, and reliable performance, making it a preferred choice for electricians and contractors.

KEI 1 sqmm 1 Core FR Yellow Wire is a single‑core, multistrand copper conductor electrical wire with flame‑retardant (FR) PVC insulation. It is engineered for safe internal wiring in homes, offices, shops, and light industrial environments.

This wire delivers efficient current transmission, enhanced fire resistance, and durability, making it suitable for lighting circuits and low‑to‑moderate electrical loads.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 1 sqmm
• Core: Single core
• Conductor Material: Multistrand copper (~32 strands)
• Insulation: FR grade PVC
• Voltage Rating: Up to 1100 V
• Current Carrying Capacity: Approx. 11–12 A
• Standard: Conforms to IS 694 recommended for house wiring
• Length Options: Usually available in 90m / 100m / 180m coils
• Color: Yellow

• Flame Retardant Insulation:
  Reduces the rate of flame spread during a fire, improving electrical safety.
• High‑Quality Copper Conductor:
  Ensures efficient power flow with low resistance and minimal losses.
• Flexible Multistrand Construction:
  Easier installation in conduits and junctions compared to solid wires.
• Durable PVC Sheath:
  Protects the conductor against moisture, abrasion, and environmental stressors.
• Low‑Voltage Application:
  Ideal for connections in standard domestic and commercial electrical circuits.

• House wiring (lighting circuits, small power circuits)
• Switchboards & distribution panels
• Control and signaling circuits
• Wiring in offices, shops, and flats
• Connections to small appliances (fans, lights, etc.)

• Yellow is typically used for identification of phase or specific circuits during wiring.
• It does not affect electrical performance — only helps in color‑coding for easy identification and safety.

KEI 1 sqmm 1 core FR yellow wire is a safe, durable, and reliable electrical wire suitable for moderate‑load applications in residential and commercial settings. With flame‑retardant insulation and high‑quality copper conductors, it is a dependable choice for everyday wiring needs.

KEI 1 sqmm 1 Core FR White Wire is a single‑core, multistrand copper electrical wire with flame‑retardant (FR) PVC insulation, designed for internal wiring in residential, commercial, and light industrial electrical systems.

It delivers efficient current transmission, improved fire resistance, and long service life, making it suitable for lighting circuits, socket circuits (small loads), and control wiring.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size: 1.0 sq mm
• Core: 1 core
• Conductor: Multistrand copper (≈32 strands)
• Insulation: FR grade PVC
• Voltage Rating: Up to 1100 V
• Current Carrying Capacity: Approx. 11–12 A
• Length: Typically 90 m / 100 m / 180 m coils
• Standard: Conforms to IS/IEC wiring norms (suitable for home wiring)
• Color: White

• Flame Retardant Insulation:
  Special FR PVC reduces fire propagation, enhancing overall safety.
• High‑Conductivity Copper:
  Ensures efficient current flow with low resistance.
• Flexible Multistrand Design:
  Easier routing through conduits and restricted spaces.
• Durable PVC Sheathing:
  Provides protection against moisture, abrasion, and mechanical stress.
• Reliable for Low‑Voltage Use:
  Ideal for domestic and commercial house wiring up to ~1.1 kV.

• House wiring (lighting & small power circuits)
• Switchboards and distribution boards
• Control wiring for appliances
• Internal wiring in flats, offices, shops
• Ring/wiring loops for switches and sockets (light loads)

• White is commonly used for neutral conductors or specific circuit identification in color‑coded installations.
• Color does not change the electrical performance—it’s for easy wiring identification and organization.

KEI 1 sqmm 1 core FR white wire is a safe, durable, and versatile electrical wire ideal for everyday wiring needs in homes and commercial spaces. It offers good fire resistance, flexibility, and reliable performance for standard circuits with moderate power requirements.

KEI 1 SQMM 1 Core FR Wire is a single‑core, multistrand copper electrical cable with FR (Flame‑Retardant) PVC insulation, developed for internal electrical wiring in residential, commercial, and light‑industrial settings.

It provides safe, efficient current transmission, enhanced fire safety, and long durability, making it ideal for everyday electrical circuits, including lighting, switches, fans, and low‑power outlets.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Core: Single core
• Size / Cross‑Section: 1 sqmm (square millimeter)
• Conductor: Multistrand Copper (flexible, high conductivity)
• Insulation: FR grade PVC
• Voltage Rating: Up to 1100 V
• Current Carrying Capacity: Approx. 11–12 A
• Length Options: 90 m / 100 m / 180 m coils
• Conforms To: Indian electrical wiring standards suitable for house wiring
• Color: Available in black, red, blue, white, grey, yellow, green, etc.

✔ Flame Retardant Insulation
‑ Reduces propagation of fire in case of electrical faults, improving safety.

✔ High‑Quality Copper Conductor
‑ Ensures efficient current flow with low resistance and minimal power loss.

✔ Multistrand Design
‑ Offers flexibility for easy routing through conduits and tight wiring spaces.

✔ Durable PVC Jacket
‑ Protects against moisture, abrasion, and mechanical stress.

✔ Reliable for Standard Wiring
‑ Suitable for domestic/commercial internal wiring up to ~1.1 kV.

• House wiring (lighting circuits)
• Switchboard and panel wiring
• Fans, lights, and small appliances
• Control wiring and signal loops
• Internal wiring in flats, offices, shops

• The wire is available in multiple colors (e.g., black, red, blue, white, grey).
• Color does not affect electrical performance; it is used for circuit identification during installation.

This wire is ideal for:

• Electricians and contractors installing domestic wiring
• DIY home wiring (lights, fans, switches)
• Commercial interior wiring jobs

KEI 1 SQMM 1 Core FR wire is a safe, flexible, and reliable choice for everyday electrical installations, offering good fire resistance, long life, and dependable performance for standard wiring circuits.

KEI 1 sqmm 1 Core FR Grey Wire is a single‑core, multistrand copper electrical cable with flame‑retardant (FR) PVC insulation, engineered for internal wiring in residential, commercial, and light‑industrial electrical systems.

This wire combines good electrical conductivity, enhanced safety against fire, and long‑term durability, making it a reliable choice for lighting circuits, control wiring, and low‑to‑moderate load power circuits.

• Brand: KEI
• Series: Homecab
• Type: FR (Flame Retardant)
• Size / Cross‑Section: 1 sqmm
• Core: 1 Core (single conductor)
• Conductor Material: Flexible multistrand copper
• Insulation: PVC (FR grade)
• Voltage Rating: Up to 1100 V
• Current Carrying Capacity: Approx. 11‑12 A
• Length Options: Commonly available in 90 m / 100 m / 180 m coils
• Standard: Suitable for standard house wiring
• Color: Grey

• Flame Retardant PVC Insulation:
  Helps reduce the spread of fire in case of electrical faults and increases safety.
• High‑Conductivity Copper:
  Provides efficient transmission of current with minimal resistance and power loss.
• Flexible Multistrand Design:
  Makes routing the wire through conduits and bends easier compared to solid wires.
• Durable Insulation Jacket:
  Protects against abrasion, moisture, and environmental stressors, improving the lifespan of the wire.
• Suitable for Low‑Voltage Wiring:
  Ideal for wiring up to about 1.1 kV which is standard for home and office electrical circuits.

• Lighting circuits in houses, flats, offices
• Connection to fans, LED lights, and other light loads
• Switchboards and control panels
• Internal wiring for small appliances and outlets
• General purpose domestic and commercial wiring

• Grey is often used in colour‑coded wiring for neutral or designated circuits depending on local wiring conventions.
• Color does not affect electrical performance — it is purely for identification and organization in a wiring system.

KEI 1 sqmm 1 core FR grey wire is a safe, durable, and widely used electrical wire for everyday internal wiring needs. With flame‑retardant insulation and good current‑carrying capacity, it is well‑suited for moderate‑load circuits and standard house wiring applications.

Here’s a clear description of the KEI 1.5 sq mm 1 Core FR (Flame‑Retardant) Wire — a commonly used electrical wiring product from KEI WIRES & CABLES Homecab 1.5 sqmm 1 Core FR Wire and similar variants designed for safe building electrification:

KEI WIRES & CABLES Homecab 1.5 sqmm 1 Core FR Wire is a single‑core, multistrand copper electrical wire with flame‑retardant (FR) PVC insulation, made by KEI Industries. It’s intended for low‑voltage power distribution and house wiring in homes, offices, shops, and other buildings where safety and reliable current carrying are needed.

• Conductor: Flexible multistrand copper, which ensures good conductivity and makes it easier to route through conduits and bends.
• Cross‑Sectional Area: 1.5 sq mm — suitable for lighting circuits, fan lines, small appliances, and general branch circuits in buildings.
• Number of Cores: 1 core — a single conductor used typically as live/phase or sometimes neutral depending on installation requirements.
• Insulation: FR (Flame‑Retardant) PVC — insulation compound formulated to slow flame spread along the wire under electrical fault conditions.
• Voltage Rating: Suitable for standard low‑tension wiring up to ~1100 V AC (typical for house wiring).
• Typical Length: Usually supplied in coils like 90 m, 180 m, or longer depending on variant and supplier.
• Color Options: Available in colours like red, black, blue, green, yellow — which help identify different circuits during installation.

The FR PVC insulation helps retard fire propagation in the event of a short circuit or electrical fault, making this wire safer for concealed and surface wiring compared with non‑FR PVC wires. FR compounds also improve resistance to heat up to around 85 °C and are typically steam and boiling‑water resistant.

• Domestic Wiring: Lighting circuits, fans, plugs, power points, and small appliances.
• Commercial & Office Wiring: Power feeds in offices, shops, institutions where flame safety is desired.
• Panel & Distribution Wiring: Short feeder runs and sub‑circuits in distribution boards.
• Concealed or Exposed Installations: Works well inside conduits, trunking, and surface wiring.

The KEI 1.5 sq mm 1 Core FR Wire is a flame‑retardant, PVC‑insulated copper house wire ideal for safe and reliable electrical wiring in residential and commercial settings. Its FR insulation enhances fire safety, while the stranded copper core balances conductivity and flexibility for easy installation. 

Here’s a detailed description of the KEI WIRES & CABLES Homecab 2.5 sqmm 1 Core FR Wire and similar 2.5 sq mm FR PVC single‑core wires from KEI — useful for understanding what a KEI 2.5 sq mm 1 core FR wire is and where it’s used:

The KEI 2.5 sq mm 1 core FR wire is a single‑core electrical cable with flame‑retardant (FR) PVC insulation and a multistrand copper conductor. It’s part of KEI’s Homecab FR range of house wires — designed for safe and dependable electrical wiring in residential, commercial, and light industrial applications.

• Conductor Material: Flexible multistrand copper — provides good conductivity and makes the wire easy to bend and install.
• Cross‑Sectional Area: 2.5 sq mm — a common size for medium current circuits like small appliances, switches, sockets, and lighting feeds.
• Number of Cores: 1 core — single conductor (used for live/phase or neutral in circuits).
• Insulation: FR (Flame‑Retardant) PVC — insulation compound that helps slow the spread of fire along the wire in the event of electrical faults.
• Voltage Rating: Rated up to 1100 V AC — suitable for standard low‑tension building wiring.
• Length: Commonly available in 90 m or 180 m coils (depending on the variant you choose).
• Colour Options: Available in various insulation colours (e.g., black, red, blue, yellow, green) for easy identification in wiring installations.

• The FR PVC insulation is designed to retard flame spread if a short circuit or electrical failure causes overheating, helping protect inside wall and conduit installations.
• FR compounds also help the cable withstand heat up to typical operating temperatures (usually up to ≈85 °C) and resist steam/boiling water exposure — adding safety in concealed or exposed wiring.

• Domestic Wiring: Power circuits for lights, fans, plug points, and smaller appliances.
• Room/Switch Board Circuits: Ideal for runs from distribution boards to switches, sockets, or individual loads.
• Commercial & Office Wiring: Feed circuits in shops, offices, schools, etc.
• Panel & Feeder Wiring: Distribution board connections where a 2.5 sq mm conductor is appropriate.

• KEI FR wires typically conform to relevant Indian standards such as IS‑694 for PVC insulated cables (suitable for up to 1100 V).
• The flame‑retardant PVC insulation helps improve fire safety compared with non‑FR wires in building applications.

The KEI 2.5 sq mm 1 core FR wire is a flame‑retardant, PVC‑insulated copper electrical cable widely used for household and commercial wiring where a medium‑current cable is needed. Its FR insulation enhances fire safety, and flexible multistrand copper helps with easy installation and reliable performance.

This industrial socket is designed for high‑current three‑phase power distribution in heavy‑duty environments such as
Factories and workshops
Construction sites
Equipment panels requiring 125 A three‑phase power
Outdoor or harsh environments where weather/dust protection is essential

It provides a secure and standardized connection point for three‑phase plugs, especially in systems using IEC 60309 plugs and sockets. 

Schneider Electric LAD96560 terminal block is a 3-pole (3P) power terminal block used as a connection accessory for TeSys D contactors and thermal overload relays.

The EZAUX01 is an alarm switch (AL) accessory from Schneider Electric designed for use with EasyPact EZC100 and similar MCCBs (Moulded Case Circuit Breakers). It provides trip indication when a circuit breaker has tripped due to overload, short‑circuit, or voltage release operation.

• Accessory Type: Alarm switch (AL) for MCCBs
• Compatibility: EasyPact EZC100 / EasyPact CVS 100BS series breakers
• Function: Indicates breaker tripped condition
• Contact Configuration: 1 changeover contact (1 NO + 1 NC) that changes state when an alarm condition occurs
• Trip Reset: Can be reset to de‑energised state when the circuit breaker is reset
• Auxiliary Contact Type: Standard
• Rated Thermal Current (I_th): ~5 A @ free‑air conditions
• Rated Operational Currents (Ie):
  • AC‑12, AC‑15 & DC‑12 modes with various voltage/current ratings (e.g., up to 3 A @ 250 V AC)
  • Supports low loads for signalling purposes
• Minimum Load: Can detect very small signals (e.g., 10 mA @ 24 V)

• Provides visual/electrical alarm signalling in MCCB panels when a breaker trips
• Used in industrial control panels, power distribution boards, and automation systems to notify operators of a trip event
• Integrated as part of breaker auxiliary contacts for remote indication to control systems

The EZAUX01 is an alarm switch accessory for Schneider Electric EasyPact circuit breakers. It attaches to the breaker to provide trip status indication via a changeover contact, helping with alarm signalling and control system integration when a breaker operates due to fault conditions.

The LAD9V2 is a mechanical interlock unit manufactured by Schneider Electric for use in contactor assemblies. It is an accessory designed to provide mechanical interlocking between two contactors in applications such as reversing and changeover circuits. Unlike electrical interlocks, this unit works purely through mechanical linkage to prevent both contactors from being closed at the same time.

• Type: Mechanical interlock accessory (no electrical contacts involved)
• Product Range: TeSys D series contactors
• Interlocking Type: Mechanical (prevents simultaneous closure of two contactors)
• Usage: For reversing or changeover contactor configurations
• Compatible Contactors:
  • LC1D09, LC1D12, LC1D18, LC1D25, LC1D32, LC1D38
  • LC1DT20, LC1DT25, LC1DT32, LC1DT40
• Poles: 3P / 4P type mechanical interlock depending on assembly
• Net Weight: Approx. ~0.04 kg (lightweight)
• Usage Restriction: No electrical interlocking – purely mechanical linkage for safety

The LAD9V2 mechanical interlock is used when two contactors are arranged in configurations such as:

• Reversing Motor Starters: Prevents both forward and reverse contactors from energising simultaneously.
• Changeover Circuits: Ensures safe transition between two contactor states.
• Industrial Control Panels: Common in motor control systems and automation panels where mechanical safety and sequencing are required.

A mechanical interlock physically connects two contactors so that the movement of one prevents the other from closing. This ensures that, for example, in a reversing motor starter, the forward and reverse contactors cannot be closed at the same time, which would otherwise cause a short circuit or damage.

The LAD9V2 is a mechanical interlock accessory for Schneider Electric TeSys D contactors (LC1D09–LC1D38, LC1DT20–LC1DT40). It provides safe mechanical interlocking for reversing and changeover configurations without electrical interlocking, helping prevent unsafe simultaneous contactor engagement.

The LA4DT2U is an electronic on‑delay timer module designed by Schneider Electric for use with TeSys D series contactors and motor starters. It provides a controlled time delay function in electrical control circuits.

• Type: On‑delay electronic timer module (time‑delay relay)
• Series: TeSys D accessory
• Function: Delay‑ON timer (starts delay when input is energized)
• Compatibility: Designed for use with TeSys D / LC1D contactors (e.g., LC1D09…D38, LC1D40A…D80A, etc.)

• Control Voltage: 24…250 V AC/DC (wide operating range)
• Rated Insulation Voltage: 250 V (IEC standard)
• Time Delay Range: 1.5 s to 30 s (adjustable)
• Timer Type: On‑delay (delay before the output switches)
• Contact Configuration: Typically 3‑pole timer contacts (used for control applications)

• LED Indicator: Shows when delay timing is in progress
• Mounting: Top mount on the contactor or accessory adapter
• Compact design: Integrates directly with contactors without extra DIN rail space
• Good durability: ~30 million operations electrical life
• Voltage flexibility: Works with both AC and DC control inputs

This timer module is commonly used to:

• Delay energization of motor contactor control circuits
• Sequence multiple contactors or stages in an electrical control system
• Provide adjustable delay for automation logic before output actuation

It’s especially useful in motor control centers, industrial automation panels, and star‑delta starter circuits, where controlled delays help prevent electrical/mechanical stress.

LA4DT2U is a compact, adjustable on‑delay timer module that attaches to TeSys D contactors, allowing a controlled delay (1.5–30 s) in control circuits, with a wide 24–250 V AC/DC input and LED timing indicator.

PKF16F723 is a Schneider Electric industrial panel socket (from the PratiKa / Mureva PK range).

It is a CEE-style industrial power socket designed for mounting on electrical panels.

• Type: Panel-mounted industrial socket
• Current rating: 16 A
• Voltage: 200–250 V AC
• Poles: 2P+E (2 poles + earth/ground)
• Protection rating: IP67 (dust-tight and waterproof, suitable for harsh environments)
• Mounting: Angled, screw-terminal connection
• Material: Industrial-grade self-extinguishing plastic housing
• Use case: Industrial machines, equipment panels, outdoor/harsh electrical installations

It’s a heavy-duty electrical socket used inside machines or control panels, not a normal home wall socket. It’s built to handle industrial environments and can resist dust and water ingress.